Step-by-step master guide to configuring IP Passthrough on the AT&T BGW320-500 and BGW320-505 fiber gateway. Fix the 8,192 NAT table exhaustion limit, bypass double NAT, and pair with high-speed Wi-Fi 7 routers.
⚡ Quick Answer
Unlike most fiber ISPs, AT&T Fiber strictly mandates the use of their proprietary gateway—the Humax BGW320-500 or Nokia BGW320-505—because the ONT and 802.1x security certificates are built directly into the gateway hardware. You cannot simply unplug the BGW320 and connect your own router. To use a third-party Wi-Fi 7 or enterprise router without suffering from Double NAT, you must configure IP Passthrough (DHCPS-fixed mode) in the BGW320 web interface (192.168.1.254), disable all internal Wi-Fi radios and packet filters, and connect your personal router to the blue 5GbE multi-gig port (Port 1). This passes the public WAN IP directly to your personal router while preserving full multi-gigabit line-rate speeds (up to 4.8 Gbps on AT&T 5 Gig).
🚀 Ubiquiti UniFi Dream Machine Special Edition (UDM-SE)
Features a dedicated 2.5GbE RJ45 WAN port and a 10G SFP+ WAN port. Connects directly to the BGW320's 5GbE port in IP Passthrough mode, delivering 3.5 Gbps full IDS/IPS deep threat inspection, native wireguard VPN server, and advanced network segmentation.
AT&T Fiber is widely recognized as one of the premier fiber-to-the-home (FTTH) networks in the world, serving over 8 million customer locations across 21 states with symmetrical multi-gigabit speeds (300M, 500M, 1 Gig, 2 Gig, and 5 Gig). However, for networking enthusiasts, gamers, and self-hosters, AT&T's hardware policy has been a constant thorn in the side: customer connections are cryptographically locked to the provided BGW320 gateway via embedded 802.1x certificates. Because true bridge mode does not exist on AT&T firmware, network engineers must master IP Passthrough mode. In this step-by-step masterclass, we guide you through optimal configuration, overcoming NAT table limitations, and tuning multi-gig performance.
1. Understanding the Hardware: BGW320-500 vs BGW320-505
AT&T deploys two hardware revisions of the BGW320 that are functionally identical in software:
- BGW320-500: Manufactured by Humax. Identifiable by a slightly smoother matte finish.
- BGW320-505: Manufactured by Nokia. Identifiable by internal component variations.
Both models feature an integrated SFP cage on the bottom that accepts AT&T's direct optical transceivers (either GPON or 10G XGS-PON). On the rear, you will find three 1.0 Gbps LAN ports (yellow) and one 5.0 Gbps multi-gig port (blue). When configuring IP Passthrough, always connect your third-party router to the 5G Port 1 using a Cat6 or Cat6a cable to avoid bottlenecking multi-gig speeds.
2. The Infamous 8,192 NAT State Table Limitation
If your ISP delivers high speeds but your connection drops or suffers from bufferbloat during multi-device use, upgrading these verified components eliminates the bottleneck:
The primary reason power users must understand the BGW320 architecture is the NAT Session Table Limit (8,192 entries). Even when IP Passthrough is activated, the BGW320 kernel still tracks all stateful connections traversing the gateway:
- If you run BitTorrent clients with thousands of open connections, host high-volume public web servers, or run heavily distributed crypto/P2P nodes, you can quickly exhaust the 8,192 NAT limit.
- When the table hits 100%, the BGW320 silently drops new outbound connections, causing web pages to fail to resolve and smart home devices to disconnect.
- The Fix: On your personal router (e.g., ASUS, UniFi, or pfSense), reduce TCP connection timeout values (set
TCP Established Timeoutfrom 86,400 seconds down to 3,600 seconds) and set UDP connection timeouts to 30 seconds. This aggressively purges dead connections from the BGW320's memory table.
3. Step-by-Step: Enabling IP Passthrough on the BGW320
Follow these exact steps to achieve a pristine, double-NAT-free connection:
Step A: Change the BGW320 Subnet (Prevent IP Conflicts)
By default, the BGW320 uses 192.168.1.254. Many consumer routers also default to 192.168.1.1. To prevent routing deadlocks, change the BGW320's subnet:
- Connect a computer directly to a yellow LAN port on the BGW320 and browse to
http://192.168.1.254. - Enter the Access Code printed on the gateway sticker.
- Navigate to Home Network > Subnets & DHCP.
- Change the IPv4 Address to
192.168.2.254and set the DHCP start/end pool to192.168.2.64–192.168.2.253. Click Save.
Step B: Disable Internal Wi-Fi and Packet Filters
- Go to Home Network > Wi-Fi > Advanced Options. Set both 2.4GHz and 5GHz Wi-Fi Operations to OFF.
- Go to Firewall > Packet Filter and turn off packet filters.
- Go to Firewall > Firewall Advanced and set all options (DoS Protection, Flood Drop, etc.) to OFF. Your personal router will handle firewall security with vastly superior processing power.
Step C: Configure IP Passthrough
- Navigate to Firewall > IP Passthrough.
- Set Allocation Mode to Passthrough.
- Set Passthrough Mode to DHCPS-fixed.
- Under Passthrough Fixed MAC Address, click the dropdown list and select your personal router's WAN MAC address (or manually enter it).
- Click Save.
- Power off both the BGW320 and your personal router. Turn on the BGW320 and wait 3 minutes until the front LED glows steady white. Then turn on your personal router.
4. Verification: Checking for Public IP and Line-Rate Speed
Log in to your personal router's web portal. Under WAN status, verify that your router has acquired the public AT&T WAN IP (e.g., 108.x.x.x or 76.x.x.x) rather than a private 192.168.x.x address. Run our live Anycast speed test to confirm line-rate throughput and verify that bufferbloat latency remains under 5ms.
5. Advanced BGW320 Firmware Tuning: Cascaded Routers vs IP Passthrough
Experiencing packet loss, jitter spikes, or evening ISP throttling? Connect directly to dedicated gaming routes or bypass traffic shaping:
For network engineers managing small business environments or advanced homelabs with multiple public static IP addresses, AT&T's firmware offers an alternative configuration called Cascaded Router:
- When to Use IP Passthrough: Standard residential and single-IP business setups. The personal router dynamically leases the single public WAN IP, and the BGW320 automatically bridges all inbound traffic directly to your router's MAC address.
- When to Use Cascaded Router: If you purchase an AT&T Static IP block (/29 for 5 usable IPs). In the BGW320 interface under Home Network > Subnets & DHCP, toggle Cascaded Router to Enable, enter your router's local IP address as the gateway router, and input your allocated public subnet mask. Your personal firewall (such as a pfSense or OPNsense appliance) can then terminate multiple distinct public static IPs directly on its WAN interface without any NAT translation occurring on the BGW320.
- TCP MSS Clamping for Fiber: Because AT&T Fiber uses standard Ethernet frames with a 1500 MTU, ensure your third-party router's WAN MTU is set to exactly
1500with no MSS clamping unless you are routing traffic through an encrypted WireGuard VPN tunnel.